PROTECTED 3.7V LI-ION BATTERY FOR HIGH-PERFORMANCE EKO / MSL RGB LIGHTSABERS

-Length: 70mm

-3.7V 18650 Li-ion battery

-With PCB protection.

- 3400mAh.

-Usage time: 4-6 hours

-Average charging time: 5 hours

1. Before first use

• Fully charge the battery before your first use.
• Use only the cable and charger that are compatible with your lightsaber .
• Check that the battery and connector are clean and in good condition before starting charging.

2. To preserve the battery

• Avoid repeatedly letting the battery completely discharge.
• Recharge your lightsaber when it indicates that the battery is low.
• Avoid extreme temperatures, especially heat.
• A lithium-ion battery generally retains its performance better when it is not constantly kept at 0% or 100%.

3. If you do not use your sword for a long time

For extended storage periods:

• Do not store the lightsaber with a completely empty battery.
• Store it in a dry, cool place away from direct sunlight .
• If possible, regularly check the charge level and recharge the battery if necessary.

Proper maintenance = a longer-lasting battery + a lightsaber that's always ready to use.

Take care of your battery and enjoy your lightsaber to the fullest! ⚔️

SAFETY INSTRUCTIONS

Never use a battery that has a problem.

Stop use immediately if the battery:

• is swollen or deformed;
• is overheating;
• presents a leak;
• gives off an unusual odor;
• was badly damaged.

Never attempt to disassemble, drill or repair a lithium battery yourself.